Aditeg OS-620 Analog Oscilloscope 20 Mhz

SKU : Aditeg OS-620

Categories : Alat Uji & Ukur , Measurement Instrument

Spesifikasi Produk

Paket Pembelian


Vertical System
Sensitivity			5mV~5V/div,10 steps in 1-2-5 sequence
Sensitivity Accuracy			3%(x5 MAG: 5%)
Vernier vertical Sensitivity			To 1/2.5 or less.
Frequency Bandwidth			DC~20MHz(x5 MAG:DC~7MHz) AC Coupling: 10Hz.
Rise Time Approx			17.5ns(x5 MAG:50ns)
Input Impedance Approx			1M/25pF
Square wave Overshoot			5%(At 10mV/div range)
Characteristic Other distortions and other ranges			5% added to the above value
DC Balance Shift			5mV~5V/div:0.5DIV, 1mV~2Mv/DIV 2.0DIV
Linearity			0.1DIV of amplitude change when waveform of 2DIV at graticule center is moved vertically
Vertical system			CH1: Channel CH2: ChannelDUAL: Channel 1 & Channel ADD: Addition of Channel 1 and Channel 2.
Chopping repetition Frequency Approx			250KHz
Input Coupling			AC, GND, DC
Max Input Voltage			300Vp-p
CMRR 50: 1(@50KHz sine wave)
Isolation between channels			30: 1 at 20MHz"}" style="height: 25px; width: 443.681px;" data-mce-style="height: 25px; width: 443.681px;">(At 5mv/DIV range) at 50kHz ; >30: 1 at 20MHz
Vertical System
CH1 Signal Output Min. 20mV/DC (50 output bandwidth 50Hz~5MHz)
CH2 INV BAL Balance variance ratio1DIV
Triggering
Triggering Soure			CH1, CH2, LINE, EXT
Coupling AC			2MHz~20MHz: 1.5DIVSlope: +/-
Horizontal System
Trigger signal Input Impedance Max Input Voltage			Approx 1M/25pF 300V(DC+AC peak)AC not exceed 1KHz
Sweep time			0.2uSec 0.5Sec/DIV, 20 steps in 1-2-5 sequence
Vernier sweep time control			1/2.5 of panel-indicated value
Sweep magnification			10 times
x10MAG Sweep time accuracy			5%
Linearity 3%, x10MAG			5%(20ns and 50ns are uncalibrated) 5) X-Y Mode
BandwidthDC~500KHz
Packaging size			Packaging size: 53 cm L x 42 cm W x 27 cm H